Pole Mounted, Monitor/TV & keyboard LCD Arm

The Ultra 550 Series of mounting solutions for LCD / LED monitors and keyboards provides users with the ability to adjust height and tilt of the monitor and keyboard with ease. The Paralink monitor attachment provides up to 130mm (5") of independent vertical height adjustment for the monitor along with tilt up / down and swivel left / right movement. The high capacity ball joint, capable of supporting LCD / LED monitors up to 12.7kg, also enables monitors to be rotated through landscape to portrait and beyond (up to 360° depending on monitor size).

The Ultra 550 Long Reach Double Arm Monitor and Keyboard Pole Mount configuration provides a monitor and keyboard mounting solution with pole mount fitting options of 38mm (1.5"), 45mm (1.75") and 50mm (2") available.

Two styles of keyboard attachment are available: the paralink keyboard attachment allows up to 130mm (5.1") of vertical adjustment whilst maintaining the users preferred keyboard tilt; the ultra attachment in contrast is a low profile keyboard mount that does not offer vertical height adjustment. Both keyboard attachments provide a flip up stowing system for the keyboard tray (of which mini flat, composite and ergonomic options are available).

This double arm, triple pivot design provides a maximim reach of approximately 1195mm (47") to the front of the keyboard tray, with 560mm (22") of horizontal adjustment, up to 270° swivel at the Pole Mount and up to 360° monitor and keyboard swivel. A further +/- 25° of up/down/left/right monitor tilt is also available.

The Ultra 550 series of LCD/LED monitor mounting solutions is available in compact, single arm and long reach double arm configurations with or without keyboard & mouse tray. All solutions are built to the highest standards and incorporate the new delrin bearing system that provides superior load capacity, stability and wear resistance. As well as Pole Mount - wall, wall track and desk mount fittings are available.

The Ultra 550 Series of mounting solutions for LCD / LED monitors and keyboards provides users with the ability to adjust height and tilt of the monitor and keyboard with ease. The Paralink monitor attachment provides up to 130mm (5") of independent vertical height adjustment for the monitor along with tilt up / down and swivel left / right movement. The high capacity ball joint, capable of supporting LCD / LED monitors up to 12.7kg, also enables monitors to be rotated through landscape to portrait and beyond (up to 360° depending on monitor size).

The Ultra 550 Single Arm Monitor and Keyboard Pole Mount configuration provides a monitor and keyboard mounting solution with pole mount fitting options of 38mm (1.5"), 45mm (1.75") and 50mm (2") available.

Two styles of keyboard attachment are available: the paralink keyboard attachment allows up to 130mm (5.1") of vertical adjustment whilst maintaining the users preferred keyboard tilt; the ultra attachment in contrast is a low profile keyboard mount that does not offer vertical height adjustment. Both keyboard attachments provide a flip up stowing system for the keyboard tray (of which mini flat, composite and ergonomic options are available).

This single arm, double pivot design provides a maximim reach of approximately 915mm (36") to the front of the keyboard tray, with 280mm (11") of horizontal adjustment, up to 270° swivel at the Pole Mount and up to 360° monitor and keyboard swivel. A further +/- 25° of up/down/left/right monitor tilt is also available.

The Ultra 550 series of LCD/LED monitor mounting solutions is available in compact, single arm and long reach double arm configurations with or without keyboard & mouse tray. All solutions are built to the highest standards and incorporate the new delrin bearing system that provides superior load capacity, stability and wear resistance. As well as Pole Mount - wall, wall track and desk mount fittings are available.

The Ultra 550 Series of mounting solutions for LCD / LED monitors and keyboards provides users with the ability to adjust height and tilt of the monitor and keyboard with ease. The Paralink monitor attachment provides up to 130mm (5") of independent vertical height adjustment for the monitor along with tilt up / down and swivel left / right movement. The high capacity ball joint, capable of supporting LCD / LED monitors up to 12.7kg, also enables monitors to be rotated through landscape to portrait and beyond (up to 360° depending on monitor size).

The Ultra 550 Compact Monitor and Keyboard Pole Mount configuration provides a monitor and keyboard mounting solution with pole mount fitting options of 38mm (1.5"), 45mm (1.75") and 50mm (2") available.

Two styles of keyboard attachment are available: the paralink keyboard attachment allows up to 130mm (5.1") of vertical adjustment whilst maintaining the users preferred keyboard tilt; the ultra attachment in contrast is a low profile keyboard mount that does not offer vertical height adjustment. Both keyboard attachments provide a flip up stowing system for the keyboard tray (of which mini flat, composite and ergonomic options are available).

The front of the keyboard tray (depending on configuration chosen) reaches up to 635mm (25") from the center of the pole. The single pivot pole mount point provides up to 270° of monitor and keyboard swivel with +/-25° of up/down/left/right tilt available at the monitor interface.

The Ultra 550 series of LCD/LED monitor mounting solutions is available in compact, single arm and long reach double arm configurations with or without keyboard & mouse tray. All solutions are built to the highest standards and incorporate the new delrin bearing system that provides superior load capacity, stability and wear resistance. As well as Pole Mount - wall, wall track and desk mount fittings are available.

The Ultra 510 series of mounting solutions for LCD monitors and keyboards provides a minimum of 150mm built in height adjustment, tilt and 180° of rotation. Available configurations include compact non-extended, single extended 280mm (11") arm or double extended, 2 x 280mm (11") arms providing up to 600mm of extension from the pole mount. Additionally, select from a wide range of keyboard tray options including ergonomic, composite and mini 305mm wide (12") flat. Available with 38mm (1.5"), 45mm (1.75") and 50mm (2") diameter pole mounts. Split collar design enables retro fitting to existing poles.

Machined out of billet aluminium with a durable, long lasting powder coat finish, the mount can support monitor and monitor and keyboard configuration weights up to 8.16kg. Cables are managed internally on the underside of extension arms. Unique Delrin bearing system provides smooth motion and longevity. All Ultra 510 LCD monitor mounting solutions are hand assembled and engineered to highest specifications to ensure product quality. This makes them ideal in medical (including dental) environments.

All available configurations in this series can be cleaned with hospital grade cleaning solutions up to 10,000 parts bleach per 1,000,000.

The Ultra 510 series of mounting solutions for LCD monitors and keyboards provides a minimum of 150mm built in height adjustment, tilt and 180° of rotation. Available configurations include compact non-extended, single extended 280mm (11") arm or double extended, 2 x 280mm (11") arms providing up to 600mm of extension from the pole mount. Additionally, select from a wide range of keyboard tray options including ergonomic, composite and mini 305mm wide (12") flat. Available with 38mm (1.5"), 45mm (1.75") and 50mm (2") diameter pole mounts. Split collar design enables retro fitting to existing poles.

Machined out of billet aluminium with a durable, long lasting powder coat finish, the mount can support monitor and monitor and keyboard configuration weights up to 8.16kg. Cables are managed internally on the underside of extension arms. Unique Delrin bearing system provides smooth motion and longevity. All Ultra 510 LCD monitor mounting solutions are hand assembled and engineered to highest specifications to ensure product quality. This makes them ideal in medical (including dental) environments.

All available configurations in this series can be cleaned with hospital grade cleaning solutions up to 10,000 parts bleach per 1,000,000.

The Ultra 510 series of mounting solutions for LCD monitors and keyboards provides a minimum of 150mm built in height adjustment, tilt and 180° of rotation. Available configurations include compact non-extended, single extended 280mm (11") arm or double extended, 2 x 280mm (11") arms providing up to 600mm of extension from the pole mount. Additionally, select from a wide range of keyboard tray options including ergonomic, composite and mini 305mm wide (12") flat. Available with 38mm (1.5"), 45mm (1.75") and 50mm (2") diameter pole mounts. Split collar design enables retro fitting to existing poles.

Machined out of billet aluminium with a durable, long lasting powder coat finish, the mount can support monitor and monitor and keyboard configuration weights up to 8.16kg. Cables are managed internally on the underside of extension arms. Unique Delrin bearing system provides smooth motion and longevity. All Ultra 510 LCD monitor mounting solutions are hand assembled and engineered to highest specifications to ensure product quality. This makes them ideal in medical (including dental) environments.

All available configurations in this series can be cleaned with hospital grade cleaning solutions up to 10,000 parts bleach per 1,000,000.

The T2 with Paralink adjuster is the premier rigid arm LCD mount. This arm features full cable management from the LCD monitor to the mounting point. The T2 with Paralink series covers a vast range of configuration options including wall, desk and pole mountings. It is available in configurations which include compact non-extended, single 305mm (12") or single 508mm (20") extension arm or double 305mm (12") or double 508mm (20") extension arms. Available in monitor only or combination LCD monitor and keyboard configuations.

T2 with Paralink extended configurations enable the cables to be completely hidden inside the unit, even at the joints allowing full range of movement as if there are no wires connected.

The T2 with Paralink range has the capacity to extend up to 1130mm (44.4") from the 50mm (2") pole mount and fold to within 150mm (5.9") when not in use whilst supporting monitors up to 12.7kg in weight.

Select from a wide range of keyboard tray options including ergonomic, composite and mini 305mm (12") wide flat. Finishes include medical white, light grey or black.

The Compact T2 with paralink LCD mount provides an adjustable, high load capacity solution where limited reach is required. Each attached LCD monitor is able to tilt, angle left to right and move through landscape to portrait.

All available configurations in this series can be cleaned with hospital grade cleaning solutions up to 10,000 parts bleach per 1,000,000.

The T2 with Paralink adjuster is the premier rigid arm LCD mount. This arm features full cable management from the LCD monitor to the mounting point. The T2 with Paralink series covers a vast range of configuration options including wall, desk and pole mountings. It is available in configurations which include compact non-extended, single 305mm (12") or single 508mm (20") extension arm or double 305mm (12") or double 508mm (20") extension arms. Available in monitor only or combination LCD monitor and keyboard configuations.

T2 with Paralink extended configurations enable the cables to be completely hidden inside the unit, even at the joints allowing full range of movement as if there are no wires connected.

The T2 with Paralink range has the capacity to extend up to 1130mm (44.4") from the 50mm (2") pole mount and fold to within 150mm (5.9") when not in use whilst supporting monitors up to 12.7kg in weight.

Select from a wide range of keyboard tray options including ergonomic, composite and mini 305mm (12") wide flat. Finishes include medical white, light grey or black.

The 305mm (12") single extended T2 with paralink LCD mount provides an adjustable, high load capacity solution where maximum reach is required. Each attached LCD monitor is able to tilt, angle left to right and move through landscape to portrait.

All available configurations in this series can be cleaned with hospital grade cleaning solutions up to 10,000 parts bleach per 1,000,000.

The T2 with Paralink adjuster is the premier rigid arm LCD mount. This arm features full cable management from the LCD monitor to the mounting point. The T2 with Paralink series covers a vast range of configuration options including wall, desk and pole mountings. It is available in configurations which include compact non-extended, single 305mm (12") or single 508mm (20") extension arm or double 305mm (12") or double 508mm (20") extension arms. Available in monitor only or combination LCD monitor and keyboard configuations.

T2 with Paralink extended configurations enable the cables to be completely hidden inside the unit, even at the joints allowing full range of movement as if there are no wires connected.

The T2 with Paralink range has the capacity to extend up to 1130mm (44.4") from the 50mm (2") pole mount and fold to within 150mm (5.9") when not in use whilst supporting monitors up to 12.7kg in weight.

Select from a wide range of keyboard tray options including ergonomic, composite and mini 305mm (12") wide flat. Finishes include medical white, light grey or black.

The 510mm (20") single extended T2 with paralink LCD mount provides an adjustable, high load capacity solution where maximum reach is required. Each attached LCD monitor is able to tilt, angle left to right and move through landscape to portrait.

All available configurations in this series can be cleaned with hospital grade cleaning solutions up to 10,000 parts bleach per 1,000,000.

The T2 with Paralink adjuster is the premier rigid arm LCD mount. This arm features full cable management from the LCD monitor to the mounting point. The T2 with Paralink series covers a vast range of configuration options including wall, desk and pole mountings. It is available in configurations which include compact non-extended, single 305mm (12") or single 508mm (20") extension arm or double 305mm (12") or double 508mm (20") extension arms. Available in monitor only or combination LCD monitor and keyboard configuations.

T2 with Paralink extended configurations enable the cables to be completely hidden inside the unit, even at the joints allowing full range of movement as if there are no wires connected.

The T2 with Paralink range has the capacity to extend up to 1130mm (44.4") from the 50mm (2") pole mount and fold to within 150mm (5.9") when not in use whilst supporting monitors up to 12.7kg in weight.

Select from a wide range of keyboard tray options including ergonomic, composite and mini 305mm (12") wide flat. Finishes include medical white, light grey or black.

The double extended short reach T2 with paralink LCD mount provides an adjustable, high load capacity solution where maximum reach is required. Each attached LCD monitor is able to tilt, angle left to right and move through landscape to portrait.

All available configurations in this series can be cleaned with hospital grade cleaning solutions up to 10,000 parts bleach per 1,000,000.

The T2 with Paralink adjuster is the premier rigid arm LCD mount. This arm features full cable management from the LCD monitor to the mounting point. The T2 with Paralink series covers a vast range of configuration options including wall, desk and pole mountings. It is available in configurations which include compact non-extended, single 305mm (12") or single 508mm (20") extension arm or double 305mm (12") or double 508mm (20") extension arms. Available in monitor only or combination LCD monitor and keyboard configuations.

T2 with Paralink extended configurations enable the cables to be completely hidden inside the unit, even at the joints allowing full range of movement as if there are no wires connected.

The T2 with Paralink range has the capacity to extend up to 1130mm (44.4") from the 50mm (2") pole mount and fold to within 150mm (5.9") when not in use whilst supporting monitors up to 12.7kg in weight.

Select from a wide range of keyboard tray options including ergonomic, composite and mini 305mm (12") wide flat. Finishes include medical white, light grey or black.

The double medium long reach T2 with paralink LCD mount provides an adjustable, high load capacity solution where maximum reach is required. Each attached LCD monitor is able to tilt, angle left to right and move through landscape to portrait.

All available configurations in this series can be cleaned with hospital grade cleaning solutions up to 10,000 parts bleach per 1,000,000.

The T2 with Paralink adjuster is the premier rigid arm LCD mount. This arm features full cable management from the LCD monitor to the mounting point. The T2 with Paralink series covers a vast range of configuration options including wall, desk and pole mountings. It is available in configurations which include compact non-extended, single 305mm (12") or single 508mm (20") extension arm or double 305mm (12") or double 508mm (20") extension arms. Available in monitor only or combination LCD monitor and keyboard configuations.

T2 with Paralink extended configurations enable the cables to be completely hidden inside the unit, even at the joints allowing full range of movement as if there are no wires connected.

The T2 with Paralink range has the capacity to extend up to 1130mm (44.4") from the 50mm (2") pole mount and fold to within 150mm (5.9") when not in use whilst supporting monitors up to 12.7kg in weight.

Select from a wide range of keyboard tray options including ergonomic, composite and mini 305mm (12") wide flat. Finishes include medical white, light grey or black.

The double extended long reach T2 with paralink LCD mount provides an adjustable, high load capacity solution where maximum reach is required. Each attached LCD monitor is able to tilt, angle left to right and move through landscape to portrait.

All available configurations in this series can be cleaned with hospital grade cleaning solutions up to 10,000 parts bleach per 1,000,000.

The Elite with Paralink Series of adjustable LCD monitor arms incorporate revolutionary design features allowing monitors of up to 12.7kg (monitor only) or 9.9kg (combination monitor and keyboard) to be supported whilst providing effortless movement of up to 1524mm from the mounting point.

Cables are neatly routed internally through the Elite arm. Each arm section incorporates a tensionable gas cylinder that enables user friendly ergonomic height and reach adjustment. The Paralink monitor attachment allows for tilt, swivel and the ability to rotate the monitor from landscape to portrait.

Available in monitor only or combination monitor and keyboard configurations, desk, wall or pole mount fittings. Select from a wide range of keyboard tray options including ergonomic, composite and mini 305mm (12") flat. Finishes include medical white, light grey or black.

All available configurations in this series can be cleaned with hospital grade cleaning solutions up to 10,000 parts bleach per 1,000,000.